1. In gauge pressure, the atmospheric pressure on the scale is marked as ?

100

10

1

0

Answer: 0

Explanation:

In gauge pressure, the atmospheric pressure on the scale is marked as 0


2. The process of maintaining the moisture and temperature condition of concrete develops hardened properties over time is called .... ?

curing

setting

hardening

softening

Answer: curing

Explanation:

The process of maintaining the moisture and temperature condition of concrete develops hardened properties over time is called curing


3. An overflow dam is also known as a ...... ?

Gravity dam

spillway

rockfill dam

reservoir

Answer: spillway

Explanation:

An overflow dam is also known as a spillway


4. The minimum edge distance and end distance from the centre of any hole to the nearest edge of plate for sheared or hand flame cut edge is ?

1.9 times the wool diameter

1.7 time the wool diameter

1.5 time the hole diameter

1.8 times the full diameter

Answer: 1.7 time the wool diameter

Explanation:

The minimum edge distance and end distance from the centre of any hole to the nearest edge of plate for sheared or hand flame cut edge is 1.7 time the wool diameter


5. The diameter of the sieve for finding liquid limit is ?

125 microns

375 mg

250 mg

425 microns

Answer: 425 microns

Explanation:

The diameter of the sieve for finding liquid limit is 425 microns


6. Cast iron is manufactured by re-melting ............ with coke and limestone. ?

Wrought iron

cast iron

iron

pig iron

Answer: pig iron

Explanation:

Cast iron is manufactured by re-melting pig iron with coke and limestone.


7. In a geodetic survey the surface of the earth is considered ?

Inclined

vertical

horizontal

Curved

Answer: Curved

Explanation:

In a geodetic survey the surface of the earth is considered Curved


8. The Unified Soil Classification System was originally developed by ?

Mohr

Casagrande

Atterberg

Terzaghi

Answer: Casagrande

Explanation:

The Unified Soil Classification System was originally developed by Casagrande


9. The spacing of stirrups in a beam ?

decreases near the support

depends on the size of the beam

increases near the support

is the same everywhere

Answer: decreases near the support

Explanation:

The spacing of stirrups in a beam decreases near the support


10. The SI unit of kinematic viscosity is ?

unitless

m^2/s

m^3/s

m/s^2

Answer: m^2/s

Explanation:

The SI unit of kinematic viscosity is m^2/s