| 1. | The Jig, which doesn’t have a base but can be set over the job to be drilled is called _________ ? | |
|
box jig
|
||
|
sandwich jig
|
||
|
channel jig
|
||
|
trunnion jig
|
||
View Answer
Discuss in Forum
Report Question| 2. | Which device hold, supports, locates and also guide the cutting too for operation ? | |
|
jig
|
||
|
fixture
|
||
|
machine vice
|
||
|
chuck
|
||
| 3. | A point to point control system is suitable only for one of the following applications ? | |
|
drilling
|
||
|
turning
|
||
|
filling
|
||
|
grinding
|
||
| 4. | Jig are preferred over fixture in which operation ? | |
|
milling
|
||
|
turning
|
||
|
knurling
|
||
|
drilling
|
||
| 5. | Jig are not use ? | |
|
milling
|
||
|
reaming
|
||
|
tapping
|
||
|
drilling
|
||
| 6. | Usually drill jig is not clamped to the drilling machine table. Which among the following is the reason for this ? | |
|
it is rigid enough for this operation
|
||
|
it is easy for operation
|
||
|
number of holes of various sizes are normally being drilled in different setting
|
||
|
it is a more time consuming device
|
||
| 7. | Which among the following is a locator used for location from internal diameter ? | |
|
solid supports
|
||
|
pin type locator
|
||
|
vee locator
|
||
|
nest locator
|
||
| 8. | Which among the following statements is not correct ? | |
|
jig is used for planning operation
|
||
|
jig is used for drilling operation
|
||
|
jig is used for indexing operation
|
||
|
jig is used for boring operation
|
||
| 9. | Fixed renewable bushings are used when ? | |
|
many a holes of various sizes are to be drilled on a jig in different settings
|
||
|
more than one operation has to be performed through the same location of the jig
|
||
|
one operation is to be performed in each hole but several bushings must be used during the life of the jig
|
||
|
no bushings change is required
|
||
| 10. | Tolerance on jig should be ? | |
|
5% of the tolerance on the job
|
||
|
10% of the tolerance on the job
|
||
|
20 to 50% of the tolerance on the job
|
||
|
100% of the tolerance on the job
|
||