| 1. | Drill jig bushings are normally hardened to ? | |
|
protect the jig from damage
|
||
|
ensure prolonged life without wear and tear so as to guide the tool accurately
|
||
|
guide the tool so that it does not inclined
|
||
|
allow the chips to come out easily
|
||
View Answer
Discuss in Forum
Report Question| 2. | Fixture is a device of which ___________ ? | |
|
holds and lockets workpiece and guide the cutting tool
|
||
|
Hold and position the workpiece but does not guide the tool
|
||
|
is made lighter for quicker handling
|
||
|
is used for holding workpiece in drilling, reaming and tapping operation
|
||
| 3. | A device in which work piece is held and located for specific operation in such a way that it will guide 1 or more cutting tools to the same zone of machining is ? | |
|
jig
|
||
|
fixture
|
||
|
tail stock
|
||
|
bracket
|
||
| 4. | Slip renewable bushings are used when ? | |
|
many a holes of various sizes are to be drilled on a jig in different settings
|
||
|
more than one operation has to be performed through the same location of the jig
|
||
|
one operation is to be performed in each hole but several bushings must be used during the life of the jig
|
||
|
no bushings change is required
|
||
| 5. | The drilling jigs are used for _______ ? | |
|
Drilling operations only
|
||
|
Clamping the jobs while drilling
|
||
|
Drilling, reaming, tapping and other allied operations
|
||
|
sharpening drill to the correct angle
|
||
| 6. | Which one of the following jigs consists of drill plate, which rest on the component to be drilled ? | |
|
solid jig
|
||
|
plate jig
|
||
|
box jig
|
||
|
trunnion jig
|
||
| 7. | Which among the following jigs is used for location from a bore ? | |
|
solid jig
|
||
|
plate jig
|
||
|
box jig
|
||
|
trunnion jig
|
||
| 8. | Jig and Fixture are the production devises used to manufacture duplicate parts accurately. Which one of the following statements is not correct with respect of jig ? | |
|
it holds the tool
|
||
|
it locates the tool and the work peace
|
||
|
it hold the work peace
|
||
|
it guides the tool
|
||
| 9. | Which one of the bushes used in a drill jig permits tool of different diameter ? | |
|
press fit bush
|
||
|
removable bushes (slip)
|
||
|
fixed removable bushes
|
||
|
liner bush
|
||
| 10. | The purpose of jig and fixture is to ? | |
|
increase production rate
|
||
|
increase machining accuracy
|
||
|
facilitate interchangeable manufacturer
|
||
|
all of these
|
||