| 1. | The function of steady rest in lathe machine is ___________ ? | |
|
to preventing bending of long shaft due to cutting force
|
||
|
to avoid load on the lathe centres while turning long shaft
|
||
|
to reduce the load on the cutting tool while turning
|
||
|
to ensure to turn at higher cutting speed
|
||
View Answer
Discuss in Forum
Report Question| 2. | Which one of the following statements indicates the principle followed in turning taper by offsetting the tail stock ? | |
|
The work axis is kept out of alignment with the lathe axis and the tool movement are parallel to lathe axis
|
||
|
The work axis is kept in line lathe axis and tool is made to move at an angle to lathe axis
|
||
|
The live and dead centres are moved in opposite directions to keep the work axis out of alignment with lathe axis
|
||
|
The work axis is kept out of alignment with the lathe axis and the tool is made to move at an angle to lathe axis
|
||
| 3. | To turn an external angle having 60° included angle, the compound slide to be set to _______ ? | |
|
30°
|
||
|
60°
|
||
|
45°
|
||
|
90°
|
||
| 4. | A spindle sleeve is to be assembled to the spindle nose to perform specific operation on a lathe, this sleeve has ____ ? | |
|
External and Internal morse taper
|
||
|
External jarno taper and Internal morse taper
|
||
|
External morse taper and Internal jarno taper
|
||
|
External and Internal jarno taper
|
||
| 5. | A carbide tripped tool with blue mark on shank is used on a lathe. Which one of the following material can be machined with this tool ? | |
|
brass
|
||
|
aluminium
|
||
|
cast iron
|
||
|
steel
|
||
| 6. | Which one of the following on a lathe is used to give depth of cut ? | |
|
by adjusting the tool
|
||
|
cross slide
|
||
|
compound slide
|
||
|
top slide
|
||
| 7. | In a lathe, the compound rest is fitted on the top and to the front of the cross slide, which can swivelled horizontally through ? | |
|
45°
|
||
|
90°
|
||
|
180°
|
||
|
360°
|
||
| 8. | In a turning operation the cutting fluid is used for ? | |
|
cooling the work peace only
|
||
|
cleaning the work peace
|
||
|
cleaning the machine tool
|
||
|
cooling the cutting tool and work peace
|
||
| 9. | Which holding type is more accurate ? | |
|
3 jaw chuck
|
||
|
4 jaw chuck
|
||
|
both are equally accurate
|
||
|
a accuracy depends upon work peace
|
||
| 10. | Which of the following is not a function of headstock ? | |
|
transmission of energy from the main motor to the job
|
||
|
to provide a solid base to the job that needs to be turned
|
||
|
arrangement for the position of the job holding device
|
||
|
to provide varying speed with the help of shaft gear and liver
|
||