1. In a ribbed slab, the clear spacing between the ribs should not be more than ?

300 mm

450 mm

600 mm

800 mm

Answer: 450 mm

Explanation:


2. The losses in pre-stress in pre-tensioning system are due to ?

friction

shrinkage and creep of concrete

elastic deformation of concrete when wires are tensioned successively

none of the above

Answer: shrinkage and creep of concrete

Explanation:


3. If the sides of a slab simply supported on its edges and spanning in two ways are equal, then the maximum bending moment is multiplied by ?

0.25

0.50

0.75

0.85

Answer: 0.50

Explanation:


4. The major loss of pre-stress is caused due to ?

creep of concrete

relaxation of steel

shrinkage of concrete

all of these

Answer: all of these

Explanation:


5. In the steel beam theory of doubly reinforced concrete beams, it is assumed that ?

compression steel resists the compression

stress in compression steel is equal to stress in tension steel

in tension and compression concrete, no stress in developed

all of the above

Answer: all of the above

Explanation:


6. The object of providing foundation to a structure is to ?

distribute the load of superstructure over a large bearing area

prevent the lateral movement of the supporting material

increase the stability of structure

all of the above

Answer: all of the above

Explanation:


7. The spacing of vertical stirrups in a rectangular beam is ?

maximum near the supports

minimum near the supports

maximum near the centre

minimum near the centre

Answer: minimum near the supports

Explanation:


8. In reinforced cement concrete structures, the steel reinforcement consists of ?

deformed bars

cold twisted bars

mild steel and medium tensile steel bars

all of these

Answer: all of these

Explanation:


9. End bearing piles are used ?

to transfer load through water or soft soil to a suitable bearing stratum

to resist large horizontal or inclined forces

to compact loose granular soils

all of the above

Answer: to transfer load through water or soft soil to a suitable bearing stratum

Explanation:


10. The factor of safety due to overturning of the retaining wall is generally taken as ?

2

4

6

8

Answer: 2

Explanation: